Dave Wood Arts
WB Golf

Resetting a Classical Steel Shaft

For setting the shaft with a high strength bond, Loctite's 5 minute works very well. It's a two-part mix of resin and hardener that sets up quickly and reaches handling strength within an hour. It's also an excellent gap filler.

In the photo, a chopstick is saturated with the epoxy and inserted into the hosel bore to create a uniform film within.

The abraded shaft section will be rolled through the epoxy mix as well.

Insert the shaft into the bore until the top of the hosel firmly connects with the plastic ferrule.

Carefully align the tip section as its pushed through to match its original angle orientation on the sole.

Insert wood dowel into shaft tip.

Clean up any excess epoxy with a paper towel.

Golf Clubs Jump to page... 1.. 2.. 3.. 4


Copyright 2017 © Dave Wood

Dave Wood Arts